xTool Enclosure with Laser Shielding and Smoke Extraction

SUPPLIES LIST

The supplies, wood and tools listed below will provide you with everything you need to build the xTool laser enclosure.

Wood

Item	Qty	Link
MDF sheet – 600mm x 1200mm x 12mm [24" x 48" x 1/2"]	2	N/A
MDF sheet – 900mm x 1200mm x 12mm [36" x 48" x 1/2"]	1	N/A

Laser shielding

Item	Qty	Link
Laser shielding - 549mm x 304mm [21 5/8" x 12"] *	1	J Tech Photonics Laser Shielding

* The J Tech photonics laser shielding referenced will be cut down to size during the build. The cut can be made with a table saw, track saw or circular saw.

Hardware

Item	Qty	Link
Piano Hinge - 610mm [24"]	1	https://amzn.to/3Px7ppZ
Cabinet grab catch (roller catch)	2	https://amzn.to/4aqNBga
Pull handle	1	https://amzn.to/3vC65LP
Duct flange - 100mm [4"]	1	https://amzn.to/3VzffU3
Titebond III Woodworking Glue	1	https://amzn.to/3TSloJR

Extraction fan

Item	Qty	Link
Inline Fan - 100mm [4"] (USA power plug) (60W)	1	https://amzn.to/4ar5j3d
Inline Fan - 100mm [4"] (AU/NZ power plug) (55W)	1	Cultiv8 Inline Mixed Flow Fan

Tools

Item	Link
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity, 110V	https://amzn.to/3OCJHWF
DEWALT 20V MAX Cordless Drill / Driver Kit, Brushless, 1/2-Inch, 110V charger	https://amzn.to/3OA37vg
DEWALT Drill Bit Set / Screwdriver Set, 80-Piece	https://amzn.to/3xJgsKY

Disclaimer: A small commission might be received for sales made through the affiliate links above.

« Back to xTool Enclosure with Laser Shielding and Smoke Extraction plans