Rolling Storage Cabinet


The materials and products listed below will provide you with everything you need to build the rolling storage cabinet.


Item Qty Link
Plywood sheet – 1200mm x 600mm x 19mm [4’ x 2’ x 3/4”] * 6 N/A
Wood trim (i.e. pine) – 2200mm x 25mm x 36mm [7.25' x 1" x 1 7/16"] ** 1 N/A

* Nominal (advertised) = 19mm (3/4”), Actual (what you get) = 18mm (0.71”)

** This is a slightly oversized length, allowing the top trim to be measured directly against the cabinet top for perfect dimensions. 38mm [1 ½”] is also OK for the height, it just means there will be a slight overhang on the top trim which won’t be a problem.


Item Qty Link
Kreg Pocket Screws - 32mm 1-1/4 Inch #8 210
Button head (Truss head) screws – 30-32mm [1 1/4"] 38
Wood screws - 30-32mm [1 1/4"] 26
Caster wheels – 30kg [66lb] to 50kg [110lb]+ 4
Drawer slides – Width = 12.7mm [1/2”] Extension length = 450mm [18"] 12 (6 pairs)
Pull handle (2 pack) 6 (3 x 2 pack)
Titebond III Woodworking Glue 1


Item Link
Kreg Pocket Hole Jig 320
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity, 110V
DEWALT 20V MAX Cordless Drill / Driver Kit, Brushless, 1/2-Inch, 110V charger
DEWALT 20V MAX XR Impact Driver, Brushless, 3-Speed, 1/4-Inch, Tool Only
DEWALT Drill Bit Set / Screwdriver Set, 80-Piece

Disclaimer: A small commission might be received for sales made through the affiliate links above.